Gorilla Wall Brace System

The Gorilla Wall Brace System effectively stabilizes bowing or buckling foundation walls from inside your basement without any disturbance to the outside of your home. The galvanized steel beams brace your foundation wall against the expansive outside soil forces pushing against it. The beams are attached to the concrete basement floor and the wooden joists above. The braces stop the buckling wall from moving inward any further.


Gorilla Wall Braces have the ability to move bowed foundation walls back into place. A small trenching machine can be used next to the foundation on the outside to alleviate soil pressure on the foundation wall. The Gorilla Wall Braces apply pressure on the wall until they push the bowed wall back into place. Most of the time this work can all be done in one day. Gorilla Wall Braces can also straighten most walls over time with no excavation to the exterior of the home. A constant pressure can be kept on the bracket by tightening the screw at the top. This pressure will slowly move the beam to plumb. As the beam moves, the wall will also move back to its original position without any exterior excavation. The innovative floor bracket allows for the installation of the Gorilla Wall Brace without removal of the concrete floor. The Gorilla Wall Brace utilizes the support of three joists instead of one like most other systems. The Gorilla Wall Brace triples the strength of other systems on the market that just push off of one joist. Utilizing three joists, the Gorilla Wall Brace distributes the wall loads evenly to the floor joists. This prevents the wood joists from twisting or buckling. Employing three joists also gives the Gorilla Wall Brace tremendous pushing power when straightening the wall. Pushing off of three joists allows the Gorilla Wall Brace system to straighten almost any bowed or cracked wall. The use of multiple wooden joists will give you the peace of mind in knowing your foundation walls and wood framing will keep your home and family safe and secure.

Hold-Right® Wall Anchor System

The Hold-Right® Wall Anchor System is a proven anchor system that has helped thousands of homeowners straighten and stabilize their bowing, bulging, and tipping basement walls. Our objective is to secure and stabilize your foundation walls and give you the peace of mind that your foundation is as safe and secure as the day you purchased your home.

The Hold-Right® Wall Anchor System is made from the highest quality steel and is galvanized for a long life-span, with the assurance of being able to perform well in a variety of soil conditions. Each Hold-Right® Wall Anchor is uniquely engineered so they are able to straighten the foundation wall immediately when the excavation of the soil is preformed on the outside of your foundation. They are also able to straighten many foundation walls over time without any disruption to your yard or landscaping.

The Hold-Right® Wall Anchor System is over engineered so there will never be any doubt that the Hold-Right® Wall Anchor will secure and stabilize your foundation.

The Main Causes Of Bowing and Tipping Foundation Walls -- One of the most common reasons for a bowing wall is the expansion of clay soils when moisture is present. Clay soils expand when they get wet, and shrink when they dry out. The expansion of wet clay soils put additional pressure on the foundation wall. When this force exceeds the strength of the wall, the wall cracks and moves inward. The structural integrity of the wall is now compromised, and future wetting of the soil will continue to weaken the wall over time.

    Advantages of the Hold-Right® Wall Anchor
  • Most jobs can be completed in one day
  • Engineer certified
  • Minimal disturbance to your home and lawn
  • Will stabilize or straighten weakened walls
  • A 25 year warranty against any further inward movement
  • Will NOT damage wood framing or concrete basement floor
  • Provides peace of mind and restored property values.

Gorilla Wall Anchor System






Hold Right Wall Anchor System